1 Video Surveillance Management Software NVClient V5 User Manual Version: V5.0 Update Date: 2 Welcome Thanks for using the Company's digital video surveillance management software. Please read this document carefully before use.
During operation, if you re unable to solve the problems according to the descriptions in this manual, please contact our technical support or product suppliers. As a user manual describes the use of IP Camera, DVR use is consistent with the IP Camera Contents of this document will be updated from time to time without notice.
Video Surveillance Management Software NVClient V5 User Manual Version: V5.0 Update Date: 2013 -12-12 Welcome Thanks for using the Company's digital video surveillance management software. Please read this document carefully before use. Best Video Software for Windows Stay Private and Protected with the Best Firefox Security Extensions 3 Free Microsoft Office Photo Editor Alternatives Get the Best.
7 Figure (4) 'User name' default: admin 'Password' default: empty Check the 'Remember Password' option; when re-entering the management software, there is no need to re-enter the password to log video surveillance management software interface 8 Part IV: Introduction of the Main Interface The main interface of management software can only single-screen display up to 36-way image. You can manually switch the pages as needed, or it can be set to automatically switch pages to polling the connected channels. Composition of the interface: System menu area, image preview window and status, standard toolbar area, equipment list area, Close and Minimize composition.
4.1 System menu area The system menu area is described in the following table: Icon Text Function Description Real-time preview Click this button to check video real-time preview Video playback Click this button to enter the video playback interface - 5. 12 Through the rotation of the direction key to control PTZ camera eight direction, by dragging to control PTZ rotation speed.
Click, PTZ will automatic scanning, the next click will stop the scanning. Click the right side of the function keys to adjust Zoom, Focus and Iris. Icon Text Function Description Zoom Enlarge or reduce the video image Focus Adjust the focal length of the lens Aperture Adjust the size of the aperture Direction Control PTZ up, down, left, right, automatic scanning Wiper Turn on/off wiper function Light Turn on / off light PTZ speed Adjust the PTZ speed PTZ preset point setting Support 255 preset point setup and call. Icon Text Function Description Add preset point Right click the preset point number to be added, add the current preset position - 9. 13 Call preset point Double click the preset point to call the set preset position Cruise path Set the cruise path Add 2 or more preset points to the view channel, you can set these preset points in a new cruise path. The interface is shown as in below.
Step 1: Choose the channel which need set cruise path, click window. In PTZ control panel, according to cruise path settings Step 2: Right click the cruise route name, click Cruise route configuration, enter Cruise route configuration. Double click also can enter Cruise route configuration.
Step 3: Click to add cruise point, in the preset point list you can choose the preset point. Step 4: Set the preset point cruise time and speed. Click save add cruise point. Note: the range of cruise time: 1 3600 seconds, cruising speed range of 1 14 Step 5: Repeat step 3 and step 4, add to cruise to cruise route list. Choose the cruise route you set, click to call cruise route, click to stop cruise route Color settings Icon Text Function Description Brightness Contrast Saturation Sharpness Default value Adjust the brightness of the front-end IPC, DVS, DVR video preview Adjust the contrast of the front-end IPC, DVS, DVR video preview Adjust the saturation of the front-end IPC, DVS, DVR video preview Adjust the sharpness of the front-end IPC, DVS, DVR video preview Default front-end IPC, DVS, DVR color parameters 15 Icon Text Function Description 4.5 Preview Window The preview windows can be inter-exchanged. 4.6 Alarm information The alarm information window displays motion detection, video loss, alarm input, other alarms and so on.
You can query the relative types of alarm information. 16 Alarm Close / open alarm information window Alarm type Find the corresponding alarm according to the alarm type information Part V Detailed Description of the Software Function Set The client management system features include several functional modules such as video playback, loop switching, packet switching, equipment management, group management, basic configuration, user management, remote setting and lock, which will be discussed one by one as follows. 5.1 Video playback Video playback includes options like local playback, remote playback, type retrieval, time / file list retrieval, playback control, playback tool and multi-screen display.
Function Description: Video playback can playback the video files, supports the multi-channel, multi-file, simultaneous playback and multi-screen display functions, and supports video retrieval. Function Introduction 'Local playback': detect disk video files of the local computer and local video playback 'Remote playback': test disk video files of the front-end equipment and local video playback Type Search ': retrieve disk video files of the local computer or front-end equipment according to video file types 'Synchronous playback: search playback and simultaneous playback by time. 25 5.2.5 Scheme Alarm link set up Step 1: Choose the device you want set, check Step 2: Choose the channel of the device, set alarm type. Step 3: Modify and save the setting. Link scheme set up Step 1: According to the demand, you can choose scheme 1 to scheme 10.
Step 2: Set the rule name, play sound, duration, record, PTZ preset point, pop up video 26 5.2.6 User management Users can be given different operating authorities according to the actual needs of different users, the interface as follows: 27 Setup steps for a new user: Step 1: Select the Add User button Step 2: Set a new username and new password Step 3: Authorize the user specific operating authority Step 4: Check the OK button to complete adding a new user. You can visit the client by this username for operation Remote setup Remote setup mainly focuses on the configuration of the parameters for various functions of the front-end equipment. For detailed configuration, refer to the user manual of video server and DVR Log Search Users can search system log, alarm log and APP log information, as below shown. 28 5.3 Group switching The user can set up multiple groups as needed for video group display or loop switching display.
For detailed setting procedures of packet switching, please refer to section Group management. Set up groups, select the group list in the real-time preview screen and right click the group list; the functions 29 are as follows: Item Function Description Grouping play Grouping attribute Polling to this group Manual grouping play Check the residence time, number of split-screens and other related information of group settings Allow polling in the group management, set the polling to this group Part VI Video Surveillance Management Software FAQ 6.1 Unable to access the network monitoring equipment through the video surveillance management software Possible cause: no network? Solution: access the network by computer to test whether the network access is working properly; first troubleshoot the cable failure, network failure caused by computer viruses and firewall blocking until able to Ping between the computers. Possible cause: IP address is occupied by other devices?
Solution: disconnect the network monitoring device to the network, connect the network monitoring device to the computer separately, and then set the IP address following the correct operation. Possible cause: the computer's IP address and network equipment are located in different segments or different subnets? Solution: check IP address, subnet mask and gateway settings. Possible cause: unknown? Solution: press the reset button on the server to restore to the factory default state, and then reconnect; default IP address for the DVS / IP Camera system is, subnet mask Image display color is not normal Possible cause: poor site light? Solution: check whether the site ambient light is normal, increase auxiliary light source.
Possible cause: the video frequency system setting is not correct? Solution: test whether the equipment video format (PAL or NTSC) is correct.
Possible cause: bright color adjustable parameters are not set correctly? Solution: adjust the color values of the bright parameters depending on the site environment. 6.3 PTZ camera cannot be controlled Possible cause: the signal cable is not connected or not connected properly? Solution: reconnect the control line that connects PTZ or dome camera to the server. Possible causes: not correctly set the corresponding decoder protocol, address or baud rate?
30 Solution: please carefully check whether the settings are correct. Possible cause: the control line is too long? Solution: bold the control line.
Possible cause: the equipment power is not enough? Solution: use the standard power adapter to increase power. 6.4 No sound while monitoring Possible cause: no audio input device connected? Solution: check the audio connections. Possible cause: the audio option of the front-end device is not open? Solution: check the audio parameter settings of the front-end equipment to see if the audio is open. 6.5 Audio ineffective Possible cause: when the audio sounds to have a lot of cacophony and serious sound distortion, please check whether the input signal level is inputted from the line.
Most of the time when the input signal is not inputted from the line (such as a zoom back microphone), the server does not match the input level, resulting in saturation distortion. Solution: use the appropriate line input in accordance with the acceptable range of the video server. Part VII Factors that Affect System Performance When you build your system, you must consider the overall system performance, the factors that affect your system, and how to set up your system to achieve optimal performance. The bandwidth issues are usually issues to consider, namely, how to set the bit rate, and other issues such as: frame rate issues; when the video surveillance management software is connected too much, it will affect the frame rate of the server. The followings are some general factors for us to consider in the construction of the system, which may affect the server efficiency: 1. First is the problem of your network bandwidth. It is usually OK for the LAN, but if it is WAN or any private network, we must consider the network upload bandwidth.
If the upload bandwidth is narrow, such as ceiling 512kbps, you would rather not to set the server output stream over 512kbps, otherwise it will lead to the phenomenon of audio or video interrupt. For the ADSL to be stressed, we usually concern about the downstream bandwidth of ADSL, but when we use the video server, it is the upstream bandwidth to be used.
At this time we should concern about its upstream bandwidth when designing system, such as: for general ADSL2M, the downstream bandwidth is about 1.5Mbps, but its upstream bandwidth is only 512Kkbps or less. Therefore, the network upstream bandwidth is what we should be concerned with 31 3. About how to set the image parameters according to the network, please refer to the image settings of video server and DVR user manual. Too much video surveillance management software simultaneously watching the images of the same video server image will affect the performance of the server, resulting that the video frame rate drops. Therefore, we recommend the pathways simultaneously connected to the video server and open the videos of not exceeding Capture function provided by the video server applies the means of front snapping pictures. Therefore too frequent capture will affect the performance of the server, resulting that the video frame rate drops.
Heavy network load will affect the performance of the system, probably resulting in the phenomenon of audio and video interrupt. Not enough CPU performance for the video surveillance management software host can also lead to the phenomenon of audio and video interrupt.
(.) These are optional features. Please refer to the Buying Guide for the full list of optional features available for this product. CMS-Client & CMS-Matrix Brickcom CMS is an open platform solution to centrally manage surveillance systems at different sites in diverse vertical markets. Composed of two software components, CMS-Clients and CMS-Matrix, Brickcom CMS can dramatically improve surveillance management in multiple sites especially for large-scale surveillance requirements to efficiently and effectively capture the recorded videos of incidents and to conduct the subsequent investigations.
Intuitive Central Management Solution: CMS-Client CMS-Client allows user to have a comprehensive overview of surveillance deployment with multi-layer dynamic E-Maps indicating the physical location of cameras. With smart event management, user can efficiently verify the event situation and location at the very first time to ensure the latest information of secured areas.
Simple and Efficient Video Wall Solution: CMS-Matrix CMS-Matrix is designed for CMS-Client, users can start monitoring up to 1024 channels of camera displaying on multiple monitors. With basic 36 free channels of CMS-Client, users can find out suitable solutions from Brickcom.